Programming the [ALL] SmartKey®

Once you have programmed the remote to operate your electronic devices, you can press the [ALL] SmartKey® to turn your set-top box and TV on/off with one button press. You can also program the [ALL] button to turn on/off additional electronic devices and/or tune your TV to its correct output channel.

To program [ALL] SmartKey follow these steps:

1. Press [ALL], then [MENU] together until the [CBL] button illuminates.

2. Enter one of the following options on the keypad of the remote:

[0] – Turns on / off CBL + TV (default setting)
[1] – Turns on / off CBL + TV and tunes TV to output Channel 3.
[2] – Turns on / off CBL + TV and tunes TV to output Channel 2.
[3] – Turns on / off CBL + TV and tunes TV to output Channel 4.

[10] – Turns on / off CBL + TV + DVD
[4] – Turns on / off CBL + TV + DVD and tunes TV to output Channel 3.
[5] – Turns on / off CBL + TV + DVD and tunes TV to output Channel 2.
[6] – Turns on / off CBL + TV + DVD and tunes TV to output Channel 4.

[11] – Turns on / off CBL + TV + DVD + AUDIO
[7] – Turns on / off CBL + TV + DVD + AUDIO and tunes TV to output Channel 3.
[8] – Turns on / off CBL + TV + DVD + AUDIO and tunes TV to output Channel 2.
[9] – Turns on / off CBL + TV + DVD + AUDIO and tunes TV to output Channel 4.

[12] – Turns on / off CBL + TV + AUDIO
[13] – Turns on / off CBL + TV + AUDIO and tunes TV to output Channel 3
[14] – Turns on / off CBL + TV + AUDIO and tunes TV to output Channel 2
[15] – Turns on / off CBL + TV + AUDIO and tunes TV to output Channel 4

3. As soon as you select an option, the [CBL] button will blink 3-times and go out.

When pressing the [ALL] SmartKey® , be sure to keep the remote control aimed at your electronic devices until your electronic devices turn on or / off. Whenever the [ALL] SmartKey® is pressed, the mode of the remote control will automatically switch back to Cable.